2 line type Wind Speed and Direction meter, Wind Speed and Direction meter with alarm, small Wind Speed and Direction meter, etc. Not only high-precision anemometers that can be made by meteorological instrument manufacturers, but also digital indicators, test instruments and anti-icing Anemometer-related products such as equipment are introduced.
You can display, print, and save real-time data, graphs, reports, etc. on a web browser by converting wind speed and direction data to a web.This data can be viewed anytime, anywhere from any PC connected to the network.
●Since it can be viewed with a web browser, there is no need to install special software on your PC.
●Browsing via the Internet is also possible via an LTE router.
●Wind Speed and Direction transmitter can be selected propeller type or ultrasonic type according to the application.
●Meteorological instrument certification can be acquired (sensor certification)
●1 minute data can be stored for 3 years or more.
Pamphlet
You can display, print, and save real-time data, graphs, reports, etc. on a web browser by converting wind speed and direction data to a web.This data can be viewed anytime, anywhere from any PC connected to the network.
●Since it can be viewed with a web browser, there is no need to install special software on your PC.
●Browsing via the Internet is also possible via an LTE router.
●Wind Speed and Direction transmitter can be selected propeller type or ultrasonic type according to the application.
●Meteorological instrument certification can be acquired (sensor certification)
●1 minute data can be stored for 3 years or more.
Pamphlet
Wind Speed and Direction are calculated from the propagation time difference of ultrasonic waves between three horizontally installed transducers and output as a serial signal (RS-3).
It has no moving parts and can be measured from a wind speed of 0m/s.
●You can acquire the sensor test of the Japan Meteorological Agency meteorological instrument with the transmitter alone.
●A heater is built into the transmitter head for anti-icing and anti-snow protection.
●Achieves high-precision observation from no wind (0 m/s) to strong wind (90 m/s).
●The operating temperature is -40°C to +60°C.
Pamphlet
Wind Speed and Direction are calculated from the propagation time difference of ultrasonic waves between three horizontally installed transducers and output as a serial signal (RS-3).
It has no moving parts and can be measured from a wind speed of 0m/s.
●You can acquire the sensor test of the Japan Meteorological Agency meteorological instrument with the transmitter alone.
●A heater is built into the transmitter head for anti-icing and anti-snow protection.
●Achieves high-precision observation from no wind (0 m/s) to strong wind (90 m/s).
●The operating temperature is -40°C to +60°C.
Pamphlet
The 2-wire Wind Speed and Direction meter uses a non-contact magnetic detector for the wind direction and a brushless magnetic pulse method for the wind speed.It is resistant to deterioration, starts with low torque, and can measure from light wind speed to strong wind with high accuracy.
● Lightweight, with excellent startability and response.
● Excellent weather resistance and easy maintenance due to non-contact magnetic detector and magnetic pulse system.
● JMA certification can be obtained with just a transmitter.
● Equipped with an orientation detection LED, making it easy to check and inspect the operation.
● It is also used for the Meteorological Agency Ground Meteorological Observation, AMeDAS, and Aviation Weather.
The 2-wire Wind Speed and Direction meter uses a non-contact magnetic detector for the wind direction and a brushless magnetic pulse method for the wind speed.It is resistant to deterioration, starts with low torque, and can measure from light wind speed to strong wind with high accuracy.
● Lightweight, with excellent startability and response.
● Excellent weather resistance and easy maintenance due to non-contact magnetic detector and magnetic pulse system.
● JMA certification can be obtained with just a transmitter.
● Equipped with an orientation detection LED, making it easy to check and inspect the operation.
● It is also used for the Meteorological Agency Ground Meteorological Observation, AMeDAS, and Aviation Weather.
It displays maximum and minimum wind speeds and wind direction fluctuations, capturing wind movement in three dimensions and displaying it digitally. The display can be switched between instantaneous values, 2-minute average values, and 10-minute average values. It also has various analog and digital outputs.
●10.4-inch color LCD touch panel on the main unit
Mounted on the front, observation data can be checked and various operations can be performed easily and reliably.
● Available for three models of ANEOS Wind Speed and Direction transmitters
・Ultrasonic Wind Speed and Direction Transmitter WS-400
・2-wire Wind Speed and Direction Transmitter WS-BN6 type, N-363DR type
Equipped with a web display function, various observation data can be observed and displayed on a PC on the network.
Supports surveillance (WI-804W model function)
- A wide range of digital and analog outputs are provided as standard, allowing for advanced system expansion and existing
Flexible connection to devices
It displays maximum and minimum wind speeds and wind direction fluctuations, capturing wind movement in three dimensions and displaying it digitally. The display can be switched between instantaneous values, 2-minute average values, and 10-minute average values. It also has various analog and digital outputs.
●10.4-inch color LCD touch panel on the main unit
Mounted on the front, observation data can be checked and various operations can be performed easily and reliably.
● Available for three models of ANEOS Wind Speed and Direction transmitters
・Ultrasonic Wind Speed and Direction Transmitter WS-400
・2-wire Wind Speed and Direction Transmitter WS-BN6 type, N-363DR type
Equipped with a web display function, various observation data can be observed and displayed on a PC on the network.
Supports surveillance (WI-804W model function)
- A wide range of digital and analog outputs are provided as standard, allowing for advanced system expansion and existing
Flexible connection to devices
A waterproof device that prevents the transmitter of the Wind Speed and Direction meter from being covered with snow and ice and becoming unobservable.A pipe heater is attached to the transmitter to automatically switch according to the temperature and wind speed (optional) information.
● Unlike the lamp method, no light pollution occurs.
● Energy-saving type controlled by temperature and wind speed.
● Does not affect the accuracy of the Wind Speed and Direction meter.
A waterproof device that prevents the transmitter of the Wind Speed and Direction meter from being covered with snow and ice and becoming unobservable.A pipe heater is attached to the transmitter to automatically switch according to the temperature and wind speed (optional) information.
● Unlike the lamp method, no light pollution occurs.
● Energy-saving type controlled by temperature and wind speed.
● Does not affect the accuracy of the Wind Speed and Direction meter.
As an anti-icing measure for cold regions of the Wind Speed and Direction transmitter, warm air is blown into the transmitter to prevent freezing of the propeller rotating part and wind direction rotating part. (Meteorological Agency adoption method)
As an anti-icing measure for cold regions of the Wind Speed and Direction transmitter, warm air is blown into the transmitter to prevent freezing of the propeller rotating part and wind direction rotating part. (Meteorological Agency adoption method)
The four elements of Wind Speed and Direction and average Wind Speed and Direction, which are meaningful moments related to disaster prevention, are recorded on the same recording paper.It also records data every hour and has an external output function.
● Distance measurement cable can measure distance of 2km with nonpolar 1 core.
● Wind Speed and Direction instantaneous value and average value can be recorded with 1 recorders.
● There is no need to adjust the recording paper time when power is restored after a power failure.
● Analog output function is included.
The four elements of Wind Speed and Direction and average Wind Speed and Direction, which are meaningful moments related to disaster prevention, are recorded on the same recording paper.It also records data every hour and has an external output function.
● Distance measurement cable can measure distance of 2km with nonpolar 1 core.
● Wind Speed and Direction instantaneous value and average value can be recorded with 1 recorders.
● There is no need to adjust the recording paper time when power is restored after a power failure.
● Analog output function is included.
A Wind Speed and Direction meter that wirelessly transmits Wind Speed and Direction data in places where commercial power is not available using solar cells. Instantaneous values are transmitted wirelessly by a specific low-power radio in the 429MHz band, and on the receiving side, graphs, forms, etc. can be displayed and viewed on a web browser by a web unit.
● Because it is wireless, wiring work for distance measurement cables from observation stations is not required.
● Wireless can be used without qualification and without examination.
● Because this is a transceiver that can be used for both transmission and reception, a transceiver can be installed every 1 km to enable multi-hop communication.
● Web-compatible real-time screens and various forms can be viewed from the network.
A Wind Speed and Direction meter that wirelessly transmits Wind Speed and Direction data in places where commercial power is not available using solar cells. Instantaneous values are transmitted wirelessly by a specific low-power radio in the 429MHz band, and on the receiving side, graphs, forms, etc. can be displayed and viewed on a web browser by a web unit.
● Because it is wireless, wiring work for distance measurement cables from observation stations is not required.
● Wireless can be used without qualification and without examination.
● Because this is a transceiver that can be used for both transmission and reception, a transceiver can be installed every 1 km to enable multi-hop communication.
● Web-compatible real-time screens and various forms can be viewed from the network.
The wind speed is detected by an alternator directly connected to the propeller shaft.There are various wind direction detection methods depending on the observation application.
The wind speed is detected by an alternator directly connected to the propeller shaft.There are various wind direction detection methods depending on the observation application.
A Wind Speed and Direction transmitter that incorporates an anti-freezing heater in the wind direction rotating part in cold regions.The wind speed is detected by an alternator, and the wind direction is detected by DC celsine.
● It is also mounted on ships and has excellent reliability and durability.
● The anti-icing heater makes it difficult to freeze, making it ideal for continuous observation in cold and snowy areas.
● You can get the JMA certification.
● Can be connected to various converters, recorders, data loggers, etc.
A Wind Speed and Direction transmitter that incorporates an anti-freezing heater in the wind direction rotating part in cold regions.The wind speed is detected by an alternator, and the wind direction is detected by DC celsine.
● It is also mounted on ships and has excellent reliability and durability.
● The anti-icing heater makes it difficult to freeze, making it ideal for continuous observation in cold and snowy areas.
● You can get the JMA certification.
● Can be connected to various converters, recorders, data loggers, etc.
A Wind Speed and Direction transmitter that is about 70% larger than the conventional one.The wind speed is detected by the alternator directly connected to the propeller, and the wind direction is detected by the DC celsine linked to the tail. The N-564P11 has a potentiometer type wind direction detector.
● Reliability, durability, performance, etc. are exactly the same as the conventional type, though the size is about 70% of the conventional type.
● Propellers, bodies, tails, etc. are made of reinforced plastic FRP, making them compact, lightweight, and excellent in handling, weather resistance, and tracking.
● You can get the JMA certification.
A Wind Speed and Direction transmitter that is about 70% larger than the conventional one.The wind speed is detected by the alternator directly connected to the propeller, and the wind direction is detected by the DC celsine linked to the tail. The N-564P11 has a potentiometer type wind direction detector.
● Reliability, durability, performance, etc. are exactly the same as the conventional type, though the size is about 70% of the conventional type.
● Propellers, bodies, tails, etc. are made of reinforced plastic FRP, making them compact, lightweight, and excellent in handling, weather resistance, and tracking.
● You can get the JMA certification.
Indication A photoelectric detection circuit is installed in the wind speed indicator of the Wind Speed and Direction meter, and when the set wind speed value is reached, the lamp lights up, the buzzer sounds, and an alarm is issued.The alarm can be set arbitrarily with the knob on the front of the indicator.
● This Wind Speed and Direction transmitter is widely used in various fields and has excellent durability and reliability.
● A wide angle indicator is used for easy viewing.
● Alarms can be set easily with the knob on the front of the indicator.
● Equipped with contact output for external device control.
Indication A photoelectric detection circuit is installed in the wind speed indicator of the Wind Speed and Direction meter, and when the set wind speed value is reached, the lamp lights up, the buzzer sounds, and an alarm is issued.The alarm can be set arbitrarily with the knob on the front of the indicator.
● This Wind Speed and Direction transmitter is widely used in various fields and has excellent durability and reliability.
● A wide angle indicator is used for easy viewing.
● Alarms can be set easily with the knob on the front of the indicator.
● Equipped with contact output for external device control.
Wind Speed and Direction This is a Wind Speed and Direction meter with an alarm that displays and outputs Wind Speed and Direction data and alarms by receiving signals from the transmitter. A LAN interface is standard equipment for external communication.
● Data conversion function Instantaneous Wind Speed and Direction, maximum wind speed and wind speed for 1 minutes, average wind direction and wind speed for 10 minutes, and daily maximum moment are calculated. Judge the output.
● Data display Display update: 1 second Display contents: "Month, day, hour, minute / instantaneous wind direction / wind speed", "Month, date, time, minute / average wind direction / wind speed", "Moment and average", "Moment and maximum momentary wind direction / wind speed" , "Average and maximum instantaneous wind direction / wind speed", daily maximum instantaneous wind direction / wind speed and hour and minute.
● Wind speed alarm output The instantaneous wind speed is compared with the alarm set value (1, 2, 3) and the alarm status of each data is output. The alarm is a change in the color of the LCD panel backlight and the buzzer sounds. ¡
Wind Speed and Direction This is a Wind Speed and Direction meter with an alarm that displays and outputs Wind Speed and Direction data and alarms by receiving signals from the transmitter. A LAN interface is standard equipment for external communication.
● Data conversion function Instantaneous Wind Speed and Direction, maximum wind speed and wind speed for 1 minutes, average wind direction and wind speed for 10 minutes, and daily maximum moment are calculated. Judge the output.
● Data display Display update: 1 second Display contents: "Month, day, hour, minute / instantaneous wind direction / wind speed", "Month, date, time, minute / average wind direction / wind speed", "Moment and average", "Moment and maximum momentary wind direction / wind speed" , "Average and maximum instantaneous wind direction / wind speed", daily maximum instantaneous wind direction / wind speed and hour and minute.
● Wind speed alarm output The instantaneous wind speed is compared with the alarm set value (1, 2, 3) and the alarm status of each data is output. The alarm is a change in the color of the LCD panel backlight and the buzzer sounds. ¡
It is a next-generation Wind Speed and Direction meter that replaces the small propeller type Wind Speed and Direction meter.The unit of measurement can be set from a personal computer, and RS-232C, RS-422, and analog output can be selected as options.It is also easy to install.
● No moving parts and maintenance-free.
● Measureable from low startup wind speed 0.01m / s.
● Several types of settings such as digital / analog output can be performed easily.
It is a next-generation Wind Speed and Direction meter that replaces the small propeller type Wind Speed and Direction meter.The unit of measurement can be set from a personal computer, and RS-232C, RS-422, and analog output can be selected as options.It is also easy to install.
● No moving parts and maintenance-free.
● Measureable from low startup wind speed 0.01m / s.
● Several types of settings such as digital / analog output can be performed easily.
The transmitter measures the wind speed in the tunnel by vector-calculating the change in the propagation speed of the ultrasonic pulse depending on the wind speed.In addition, the converter converts the serial signal from the transmitter to an analog signal (4 to 20mA) and outputs it externally.
● Small, lightweight and highly weather resistant transmitter.
● Measurement from wind speed “0m / s” is possible.
● There is no moving part by the ultrasonic method, and maintenance is free.
● Accurately measure only parallel wind in the tunnel.
● Equipped with an electrical signal calibration function in the converter.
The transmitter measures the wind speed in the tunnel by vector-calculating the change in the propagation speed of the ultrasonic pulse depending on the wind speed.In addition, the converter converts the serial signal from the transmitter to an analog signal (4 to 20mA) and outputs it externally.
● Small, lightweight and highly weather resistant transmitter.
● Measurement from wind speed “0m / s” is possible.
● There is no moving part by the ultrasonic method, and maintenance is free.
● Accurately measure only parallel wind in the tunnel.
● Equipped with an electrical signal calibration function in the converter.
The wind direction and speed are measured by combining a cup-type wind speed transmitter and an arrow blade-type wind direction transmitter.For cold regions, you can put a heater on the axis of rotation of the wind speed and direction to prevent freezing.
● Wind speed transmitters are widely used in various fields and have excellent durability and reliability.
● This method is widely used in Europe.
● It is used for controlling large wind power generators.
The wind direction and speed are measured by combining a cup-type wind speed transmitter and an arrow blade-type wind direction transmitter.For cold regions, you can put a heater on the axis of rotation of the wind speed and direction to prevent freezing.
● Wind speed transmitters are widely used in various fields and have excellent durability and reliability.
● This method is widely used in Europe.
● It is used for controlling large wind power generators.
