ANEOS: Measuring nature and protecting living

Solutions

Our Products

Earthquake

Our Products

Compact measuring seismic intensity meter

A seismic intensity meter with a built-in MEMS accelerometer and designed compactly. It can be used as an item of an earthquake information system for the purpose of transmitting information on measured seismic intensity.

A seismic intensity meter with a built-in MEMS accelerometer and designed compactly. It can be used as an item of an earthquake information system for the purpose of transmitting information on measured seismic intensity.


● A MEMS accelerometer with features such as high performance, bottom noise and bottom power consumption is used.
● You can get JMA certification.
● Space-saving installation is possible with an all-in-one design that integrates the measurement unit, processing unit, and communication unit in a small case.
● Equipped with up to 7 alarm output contacts for any seismic intensity or acceleration detection.
● LTE communication function can be installed as an option.
● It is possible to notify the seismic intensity scale observed by light and sound by connecting to the laminated LED indicator lamp via LAN. [Specification outline] ・ Detection method: MEMS acceleration sensor ・ Measurement component: 100 components (horizontal 10 components, upper and lower 1 component) ・ Measurement range: horizontal ± 100 gal, upper and lower ± 1.2 gal ・ Communication I / F: LAN (200BASE-TX / 120BASE) -T) 60 port ・ Mobile communication (option): SIM card mounting (LTE) ・ Power supply: ACXNUMXV ・ XNUMXW ・ External dimensions: WXNUMX × DXNUMX × HXNUMXmm

Seismic intensity meter (network compatible) SDP-1000

A seismograph that enables direct connection to a network (LAN).In earthquake detection, waveform data recording is started and various arithmetic processing (measured seismic intensity value, SI value, etc.) is performed.If necessary, it outputs alarm contacts and distributes information to the LAN.

A seismograph that enables direct connection to a network (LAN).In earthquake detection, waveform data recording is started and various arithmetic processing (measured seismic intensity value, SI value, etc.) is performed.If necessary, it outputs alarm contacts and distributes information to the LAN.


● Equipped with LAN interface as standard.
● You can get JMA certification.
● SI value calculation processing is performed at the same time as measurement seismic intensity calculation.
● All-in-one design with all measuring, processing, and communication units integrated in a small and robust housing enables space-saving installation.
● Alarm contact output is possible with any element (mixed) such as maximum acceleration, seismic intensity, and SI value.
● Low power consumption (AC100V approx. 9W) has been achieved through a power-saving design.
● Compliant with the RoHS Directive by designing with consideration for environmental protection. * RoHS Directive Directive of the European Parliament and the Board of Directors regarding restrictions on the use of specific hazardous substances contained in electrical and electronic equipment.Specified hazardous substances: 6 substances: lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls (PBB), and polybrominated diphenyl ethers (PBDE). (However, some parts such as lead-acid batteries are not subject to regulation.)

Measurement seismic intensity meter (Meteorological Agency certification correspondence) STR-361

To automatically calculate and display the seismic intensity scale from 0 to 7 when an earthquake occurs using the Japan Meteorological Agency designated algorithm, and to record and save various data associated with the earthquake, and to report the data to the host system Is a seismic intensity meter equipped with the communication function.

To automatically calculate and display the seismic intensity scale from 0 to 7 when an earthquake occurs using the Japan Meteorological Agency designated algorithm, and to record and save various data associated with the earthquake, and to report the data to the host system Is a seismic intensity meter equipped with the communication function.


● You can get JMA certification.
● It has been adopted as a seismic intensity meter for prefectural seismic intensity information networks.
● Adopts a color LCD with good visibility.
● Seismic intensity levels 5 and 6 are divided into “strong” and “weak” and displayed.
● Data communication is possible by network support.
● Realize high-speed information transmission by using the original seismic intensity real calculation method.
● 3 components (up / down, east / west, north / south) can be measured.
● A large-capacity CF card can be mounted.
● Supports early earthquake detection function. (option)
● A remote display (optional) is available to display data at a remote location.

Seismic intensity information network system  

This system quickly collects seismic intensity information obtained from measurement seismometers installed in prefectures through a network and monitors it in real time, and distributes the data quickly and reliably to the relevant agencies, including the Japan Meteorological Agency. is.

This system quickly collects seismic intensity information obtained from measurement seismometers installed in prefectures through a network and monitors it in real time, and distributes the data quickly and reliably to the relevant agencies, including the Japan Meteorological Agency. is.


● Use a wired, wireless, or satellite line to build a duplex communication system to enable reliable data collection even in the event of a disaster.
● Collected seismic intensity information can be quickly transmitted to each relevant organization (fire department, weather station, university, etc.).
● P-wave is detected, the slave station is called immediately, and the master station is activated, so data can be collected quickly.
● System construction according to customer's equipment is possible.
● In case of an emergency, the server is duplicated to prevent data loss.

Copyright © ANEOS Corporation All Rights Reserved.